Do you think Mesa will ever make a 3 channel solo 50 Recto ?

[sir riff a lot]

Well ?

 

[Fixxer6671]

no.

 

[Thrash Till Deth]

It's a good idea but you can already make a 3 channel dual rectifier 50 watts by pulling 2 power tubes.

 

[Jacko123]

It's a good idea but you can already make a 3 channel dual rectifier 50 watts by pulling 2 power tubes.

+1. That's what I'll do. I only need 50W + the 50watter head is smaller which is fine by me. How about a 4 channel 12 watter. Now I'd be all over that, lol.

 

[jdurso]

Also the Roadster can be knocked down to 50Watts on whatever channel you wnat which is a much greater option than just a 3 channel 50 watt amp.

 

[paytojt]

It's a good idea but you can already make a 3 channel dual rectifier 50 watts by pulling 2 power tubes.

+1. That's what I'll do. I only need 50W + the 50watter head is smaller which is fine by me. How about a 4 channel 12 watter. Now I'd be all over that, lol.

Roadster in 50 watt with Yellow Jackets gets you close.

 

[JonCurcio]

It's a good idea but you can already make a 3 channel dual rectifier 50 watts by pulling 2 power tubes.

+1. That's what I'll do. I only need 50W + the 50watter head is smaller which is fine by me. How about a 4 channel 12 watter. Now I'd be all over that, lol.

The 50 watt head is smaller? I thought the cabs and chassis were supposed to be the same size? I have a 50 watt single and a revision F dual and the dual cabinet is only 1/8" deeper and 1/8" narrower. I was thinking because it was old they changed the dimensions slightly.