DIY Heartbreaker channel switcher

[azernebur]

Has anyone built their own channel switcher? I would love to make my own in a small 1590A enclosure, but need some guidance, maybe a schematic and instructions with info on what kind of parts?
Thanks so so much!

 

[thunda1216]

you may find some helpful info here: http://www.muzique.com

I have built several of their projects and have been pleased with the results.

 

[azernebur]

you may find some helpful info here: http://www.muzique.com

I have built several of their projects and have been pleased with the results.

Thanks, Thunda1216 - will check it out!

 

[azernebur]

So I built my own with parts from Mammoth electronics. Very simple DPDT switch and output jack. Only issue is I can't get the LED to switch on/off when the channels are switched. When I do wire it up correctly to get the LED working, the channels don't switch. When I do get the channels switching, the LED doesn't go on/off. Using a 470ohm resistor for the LED. Will have to keep on researching this issue.

I don't know how to attach an image here, otherwise I would. I don't have a URL for it, it's just on my iPad. If you search Ruben Reza Music on Facebook, you'll see it there.