Can I use 1 cord to switch Ch's, Recto and G Major??

[Adambomb]

I have been using a stereo end to two mono ends from G Mojor to Recto for about 8 months now and no problems. I recently heard thats bad since the Recto channel switching inputs on the back of the head is supposed to have isolated grounds for each input. Since the slitter cable I was using did not, this could damage the channel switching matrix in the Recto amp.

Now I only use channel 1 and 2 of the 3 ch Recto head. So I was wondering if it would be safe to use 1 mono cable from G Major to Recto channel 1 input on back of the head, being channel 2 as default ch and just adjust the tip & ring setting on the G Major to switch between the 2 channels I use on the Recto.

Is this safe?? cause its working using the one cable from G Major to Recto switch 2 channels.

Any help would be great cause I have alot of money in my Recto head modding it and all. Thanks

 

[daveyboogie]

you could use one isolated relay switch from the GM and the other switch from the relays on your FCB...

Just a thought.

Dave

 

[Adambomb]

Well I figured if I just ran one cord from G Major to Channel 1 on the Recto then I can switch between 2 channels cause one channel will be default and other will get switched via the one cord. It really does work, I was just wondering if this was safe for me to do.