DirtyNoise
Well-known member
Up for sale is my MINT condition Baron K88 with all options. This is the quietist high gain amplifier I have ever had. Set with a Mesa 4x12 Recto cab and there isn't a mix this sucker wont cut through. It is LOUD and CLEAR. The clean is as awesome as the distortion. I love this amp, but I have no need for it anymore. I am all acoustic now days. 
If you go to Baron's web site. You will see THIS very amp under the "Gallery" at the very top of the page. These are hand built and are very high quality and sell for $1700 New. Buyer will NOT be disappointed. I included the details of this amazing amp from the site. Feel free to contact David Woodhouse (Designer/Engineer) and ask any questions about his amps. He is very informative and very friendly to talk with.
I have shipped plenty of amps over the years. All tubes will be removed and wrapped. The amp will be packaged very well to ensure a safe trip.
Cost:$1250 OBO
Features
•2 channel hand-wired, 80 or 120 watt, all tube head Made in USA!
•High gain "crunch" channel and a "clean" channel
•High gain channel mid scoop or mid shift control
•Optional Dual gain and Level controls
• Bright switches emphasize Hi-Mids or Hi treble frequencies
•variable "Shape" control allows you to dial in the low mid frequency curve
•Totally independent channels with separate tone stack and volume controls
•Global master volume with thrust and presence controls
•Variable Power amp "Voice" switch for open or tight power amp response
•Serial effects loop (+4/-10dB) can be switched in or out of the signal path (100% transparent)
•Impedance selection of 4, 8, and 16 ohms.
•Foot switchable channel, boost, effects and gain A/B selection
•5 12AX7A pre amp tubes 2 KT88 power tubes (K2 uses 4 KT88 power tubes)
•Footswitch included.
If you go to Baron's web site. You will see THIS very amp under the "Gallery" at the very top of the page. These are hand built and are very high quality and sell for $1700 New. Buyer will NOT be disappointed. I included the details of this amazing amp from the site. Feel free to contact David Woodhouse (Designer/Engineer) and ask any questions about his amps. He is very informative and very friendly to talk with.
I have shipped plenty of amps over the years. All tubes will be removed and wrapped. The amp will be packaged very well to ensure a safe trip.
Cost:$1250 OBO
Features
•2 channel hand-wired, 80 or 120 watt, all tube head Made in USA!
•High gain "crunch" channel and a "clean" channel
•High gain channel mid scoop or mid shift control
•Optional Dual gain and Level controls
• Bright switches emphasize Hi-Mids or Hi treble frequencies
•variable "Shape" control allows you to dial in the low mid frequency curve
•Totally independent channels with separate tone stack and volume controls
•Global master volume with thrust and presence controls
•Variable Power amp "Voice" switch for open or tight power amp response
•Serial effects loop (+4/-10dB) can be switched in or out of the signal path (100% transparent)
•Impedance selection of 4, 8, and 16 ohms.
•Foot switchable channel, boost, effects and gain A/B selection
•5 12AX7A pre amp tubes 2 KT88 power tubes (K2 uses 4 KT88 power tubes)
•Footswitch included.
