Another Request for Mark 5 Measurements

[squege1]

Hi All,
I'm hoping someone who owns a Mark 5 combo (mine is on order and I won't have it for another 2 or 3 weeks) would be willing to take a few measurements for me if they have a few minutes. Any help is very much appreciated!I need to get the measurements of the bottom of the amp for Studio Slips as they are making me a clamshell cover with cut-outs for the castors. They are requesting 5 measurements:

 

[Monstercastle]

Try emailing Mesa too.

 

[dlpasco]

I'll see if I can dig up a tape measure tonight and post the results unless someone else beats me to it.

 

[squege1]

I did email Mesa and they were cool enough to get the measurements for me!
Thanks for the help guys but no need to grab the tape measure.
Mesa proved to have exceptional Customer Service and the members of the forum are just as awesome to offer to take the time out to help as well.
Great brand, great products and a great community of users too!
Thanks, Joe

 

[squege1]

Here's what Boogie sent me...

 

[dlpasco]

Here's what Boogie sent me...

Please pardon these ridiculously huge images, I was in a hurry.

Well, I just got back with my own measurements and Mesa's numbers are definitely more accurate than my own.

The wheel mounts themselves are 3.75 inches wide and 3 inches deep.

They are inset about 2.5" from the edge of the amp - there are also some small feet that you may want to take into consideration as well:

The feet are inset about half an inch from the sides of the amp:

The slanty part of the front of the amp looks to be about 3.5 inches long, but it's hard to tell because there is a gradual curve to things.

 

[SamuelJ86]

I measured and got exactly what mesa got.