Search results

I'd like to validate the GSP1101. Sure sounds good to me with Mark V25. Lots of control flexibility for tones and effects.

Congratulations! Great set up. Looks like your needs are met for now.

Hi GJgo, How does your IIC+ compare to the JP2C?

Actually this might be what I really want: http://www.dropd.net/tgc1.htm Its a remote looper on/off switch. A big pedal board is more complicated that what I would like. I have a GSP1101 with a control2 floor controller. It is awesome. My other set up will be rather spartan in comparison...

I've been fiddling with the idea of a remote 1/4 inch switch to turn on my effects loop on and off. I don't see many options available. I would like to try keeping my pedals on the amp with a looper that is activated by a remote 1/4 inch switch. I would also have a handy dandy switch for EQ...

Hi, What I mean is if my delay is in the loop, I would like to have a single switch with a 1/4 inch cord running out to the front. It would be nice to have two total cords coming from the amp: 1) to switch lead to R1/R2, R1 to R2, EQ, and REV 2) EFX loop on/off The other option is to put the...

I have a Mark III that I would like to switch the effects loop on and off with. I would like a single latching switch and not an octopus of send, receive and power cords, otherwise I can just put the delay out front with all those wires. All I would like to do is switch my delay on and off...

Wow, I imagine the laser beam shooting straight out to table #4 is deadly with such high presence. ... Unless you installed a Mitchell donut!!!! :)

I made a couple donuts for my 2x12 cab with Eminence speakers: Red Ryder and a Tonespotter. It really got rid of the beam, and I am happy with the tone. I used the #4 foam from the recommended company (McMaster). It notched out the highs a bit, which can be EQ'd.

Even at simul-class 15 watts the Mark III is insanely loud, e.g., loud enough for anything I want to play. I can just barely tell the difference between 1/2 and full power.

I like footswitching the EQ on and off for variety of tone. I have a $20.00 latching footswitch that I hooked to a stereo Y splitter cable. The stereo end goes into the Mark III and the footswitch cable end goes into one of the two 1/4" female receivers, but it is only pushed to the first...

Am I in the minority that think they both sound great? They are just a little different.

I have a GNX2 unit. It has good effects, EQ, and Wah. There are a couple of amp models I like, and the distortion boxes add dirt like you would expect. However, it adds a digital artifact into your tone that you can't dial out. I have the GSP1101 now. Digitech promised a more transparent...

The 750 slider is the most powerful influence for tone change it seems to me.

bingo. presence about 2

Appreciate the detailed review! Thanks!

My GSP1101 is awesome using the Digitech Control 2 I don't have a noise issue with my Mark III using the 4 cable method (4CM). The preamp models turned out to be a nice extra, even though I wanted to focus on my nice Mark III lead channel. I have several patches set up and use the control...

I'm liking my Mark III. It crossed my mind to have another one like Schultz's piano's on Peanuts.

What happens if they explode? Does it total your amp, or do you just replace the detonated caps? Ken

my rig