Search results

Preamp tubes only when there is a fault. Power tubes can last a very long time in Marks as they are not stressed into overdrive and are usually fan cooled. They really can go for years.

Just the straight Neo. The spec for the Jet Tornado described more top end bite and less (and looser) bottom end.....neither of which I wanted. Having now gigged with it, I find it smoother than the EVM. It is also easier to balance tones and volumes between channels, which is an unexpected...

Speaker arrived. Fitted without incident. Didn't use a gasket. Screw holes and cutout matched fine. Soundwise: (1) Noticeably less volume than the EVM (hardly a surprise) but hardly a problem with the amount of amp power on tap. (2) No great loss of bottom end depth or tightness, top end...

I have ordered the Neo 12. Feedback to follow.

Very limited space means dividing by 2 is not an option.

Much as I love the EVM, I have to get the weight of my Mark iii down or it runs the risk of staying in the house. I am looking at a Jensen Neo 12. However, I can't find any useful information about actually mounting it. So...anybody....can you answer any of these questions: (1) Have you...

The reverb tube (12ax7) is the leftmost looking from the back. BTW the reverb is a little unusual on a mark iii in that is is never off unless the reverb pot is set to zero. If it is working normally it also works differently with the footswitch unplugged. I presume you have a manual and have...

Sad thing is that many experienced guitarists, particularly those of us who survived the 70s stacks, might be able to play great but not notice a sonic difference in cables. Many of us use far more treble than we used to (sound familiar?). Although we now try to play at less ear threatening...

I think it is more a case of people with the willingness to be flexible in their opinions. The guitar world is full of stubbornness and ritual choices. Many can not be convinced that any other than a "Les Paul through an old Marshall" (insert any combination of Fender/Gibson/Vox etc)can...

Have you tried higher lead master and less overall master to compensate?

I found that with my Mark iii that cables can make difference if you are using fx and the loop. I never worked out why but found that some screened guitar cables could cause hum to be picked up on my pedal board. This disappears if you use speaker cables. As these are more robust any I have...

I have never found anything I like better than the EV in the combo (green stripe mk iii, hardwood, graphic, simulclass). I have ended up using mine with a Marshall 1912. A cheap option in the UK but it adds low end thump and is a good volume match for the EV. The 1912 on its own lacks bite...

My mark iii was the same until the volume pot was renovated. Spraying deoxit might help if your are lucky. I removed the whole pot: dissembled, cleaned and retensioned the wiper. A really awkward job to get the pot in/out. Depends how much it bothers you.

Does the ground switch on a Mark iii have any function in the UK where all our sockets are 240 volts and grounded. If so how should it be set? (BTW the amp does have a voltage selector)

Cheap AB switches usually don't do the job as they induce hum loops. Used to be you needed an isolating transformer on 1 of your amps. Since the arrival of 3PDT foot switches there is another way. What I do is: 1. Switch the hot wires (all AB boxes do that) 2. Short out the "off" amp feed...

Make one. Very easy.

Either go to Westside, the UK distributors, for Mesa valves or Watford Valves if you want to try something else (Derek Rocco will advise you). +1 on the presence control If your lead sound if too aggressive - I never get above 3, usually less. The manuals recommended 7 is way too high unless...

BYOC OD2 is magnificent if you can handle the build. Lots of options and true bypass.

i recently picked up a Mark III green stripe. It came with just the lead/rhythm switch. I want to make the other footswitches: Rhythm 2/Clean and EQ-REV. Can anyone post the schematics or a picture? Nobody here in the UK is interested in ordering them and Mesa will not ship outside the US...

What have you guys tried in place of the stock speaker in a Nomad 45 1X12? Mine has the Celestion 90. I'm looking for a bigger sound.