Search results

some how managed to destroy both input jacks and need a whole new panel. I didnt see them on Mesa's site, and had no luck on CL, any one have another idea? Does anyone have one lying around, Ill buy it!

I know I can basically turn the guitar signal off adjusting the decimator, but would there be any pros/cons to running the amp louder than normal (output is at about 10 oclock, master is at 10 to) and upping the signal squash on the ISP? Or is this just counter intuitive because it will have...

i know the term is called redplating but what does it look like? I am assuming the bottom of the tube starts glowing red?

Ok, so I will tell the dude doing the work to set the plate level at like 60%, I will also keep an eye on the tubes to make sure they aren’t going haywire, do the tubes still have a chance of redplating at under 70% max? If so I will tell the guy to dial it in a 65% and keep an eye on them to...

basically, I dont want to touch anything, just tell them where to set it and take it home and play it.

i am going to have the guys at the shop do all of the work and set the bias to my EL-34's. Is there a percentage of plate dissipation i should have them set el-34's to?

found a shop in cincy, chrome dome, that will do it for 50 bucks.....taking it after practice tonight. Hopfully my little 50 watter will sound a little better. prolly not but hell with it. lol. thanks for the advice.

if i wanted to have the bias mod done to my series 2 rectoverb head.....what the typical cost to have something like this done?

your singer kinda reminds me of Overkill. cool, it gives me an idea, kick *** music also. is this you on both lead and rhythm tracks? I love the lead tone on "break the sky"

Do you have anything on youtube or with your band? also, do you recommend I put my ISP out front? I thought they were supposed to be in the fx loop. Since mine is in the FX how should I adjust the mix dial on the back, I am not an FX loop guy until now, so I am trying to learn.

Dom – do you have any sound clips of your “A” rig I could hear. I have an MXR 10 band, and ISP in the loop like you and a TS9 out front. I would like to hear your sound to get an idea of how you use your 10 band MXR

I play metalcore with an alter bridge "isolation" style tone (i know they use marks).....so I wanted to see what kind of settings i could try right out of the box if someone has some experience with this specific model in front of a rec. guitar ----> MXR custom comp ----> Ibanez ts-9 ----> Mesa...

This is a head for head trade. My single rectifier is mint, and the Nomad is mint. Is it worth a trade up or would I be getting the low end of the deal? I like 3 channels, it still can use EL or 6L6, it has a 100/60 switchable power, recording out which I liked. It has modern gain, which I...

ok new issue with clean channel - the channel doesnt have the light distorted sound now it is just super quiet. With the output at 11 o'clock and the gain on the clean at about 9 o'clock the you can barely hear the sound but it is no where close to being heard with the band. Channel 2 on...

This explains everything, I will stick with 6L6's and just turn down. thank you for the nicely laid out explanation, and the time to go over it for me.

I have been looking at the different tubes and read that if I am not cranking the **** out of this amp then the 6v6 could be an alternative. I mean, where we practice I can only run my 50 watt head at like 3 on the output and 4.5 on master volume, and it is loud. Could I run 6v6, turn the...

What are the levels and tubes in this amp, I like that tone. I am getting an OCD today, so what are the positions on that also. I would like to get around this tone.

Hi there, I want knobs like the Black Face rec, I looked on Mesa's site but didn't see any. Can someone give me a link to where I can buy some. Thanks. I don't want stiletto style chicken heads, I want round rectifier style but black.

Hi all, Went to use the clean channel for the first time in a month, and noticed that there is some light gain on the channel. I have always had the gain knob set to where it still stayed clean but this is obvious different sound. Channel two is bangin pretty hard and sounds good, its just...

Jensen makes some awful car components, so I would guess the same for music? I bet the mesa 2x12 would have been the ticket.