Search results

Thanks Lads.

Hi Guys, Im looking to pull the trigger on a Mark V Combo. Im also looking for the best possible deal in the UK, anyone got an idea of where to go for the absolute cheapest Mark V combo in the UK or Europe? Cheers Rob

Thanks Gary, I'll check that out tonight, I have a few spare 12AX7's so if it is a bad valve i should be able to trace it. Cheers Rob

so I should be able to flick the switch to "hard bypass" with nothing plugged into the loop, end os story? Thanks for your help.

Hi, When i enable the "hard bypass" switch on the FX loop I get a screaching sound that doesnt sound good? are you supposed to insert a loop between SND and RET in the loop before engaging the "hard bypass" switch? Thanks Rob

Hi All, Dropped the Mark III into my amp tech, he found a bad joint between both sides of the PCB around the rhythm circuitry, he sorted that out and I got the R2 Master Vol mod done. All is perfect with my amp and I couldn't be happier. Cheers Rob

Got sorted over the weekend thanks.

Hi, Quite Simply I am looking for a handle for my Mark III Combo, it was removed to fit a tight flightcase. As original as possible would be greeat, if you have any ideas where to get one please let me know. RGDS Rob

Thanks robredo_mattila, Ah, I understand now, your amp had the R2 mod done which created a MV on the rear panel. I took the amp apart last night and had a good look around, everything looked fine apart from a burnt resistor which still gave back a respectable reading, would anyone have any...

Thanks robredo_mattila, I'm not sure what you mean when you mention "turns out the R2 volume on the back (reverb pot) was turned to Zero" Surely the Reverb Pot is for the Reverb level only or am i missing something? Thanks for your input. Rob

Thanks

Hi, R2 Mod had not been done. robredo_mattila When you had the R2 issue, what happened when you tried to engage R2? on mine I just get the R1 channel ie no sound difference/change. Thanks Rob.

Would anyone know where I can get a handle for my Mark III Combo, it was originally removed so the amp would fit into a flight case. Any help would be appreciated. Thx Rob

Ive changed all of them but no luck, i was wondering if it was possibly the relay that switches between the R1 and R2 channel? Thanks for your suggestion though.

Hi, I have a Mark III with a problem. Pulling out the dial that activates Rhythm 2 has no effect also footswitching between Rhythm 1 and Rhythm 2 has no effect. Lead channel is perfect and also clean is perfect. I have changed all of the pre amp valves just in case. Has anyone seen this issue...