Recent content by marjan.jovanovski

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Electra Dyne schematics

    Hi to all, I've posted this issue am experiencing with my amp: https://forum.grailtone.com/viewtopic.php?f=36&t=84858 And am in need of Electra Dyne schematics so i can make sure with a qualified person that all measures are reported as per in the schematics diagrams. Would help me a lot if...
  2. M

    Electra dyne big issue with speakers blowing out

    Stephen thanks for replying, yeah it is very unusual and am so angry with my self to make actions that would lead to results that can't be narrowed down. Very amateur of me to introduced inconsistencies in changing the test environment to produce new outcomes. But this EL34 swap possible issue...
  3. M

    Electra dyne big issue with speakers blowing out

    Hi to all, Am facing with possible big problem with my Electra Dyne 112. The needed inputs to approach this topic are: 1. Mesa boogie - Electra Dyne 112 110 V (i use a transformer to convert from 220 to 110 V for all the time i have the amp more than 6 years now) 2. Celection Black Shadow 90W...
  4. M

    Electradyne 1x12, wiring additional cabinet

    Thanks dude :) and all the best to you and your family as well
  5. M

    Electradyne 1x12, wiring additional cabinet

    I will follow back with more detailed approch (pocs and all if interested). I had only a small window to play throgh the speaker, i would like to make some comparative recordings as i have also build a "studio" (kind of dont lile that word studio). It sounds brighter (subjectievly) but it is in...
  6. M

    Electradyne 1x12, wiring additional cabinet

    Thanks. It is a bit older post. Yeah i pretty much tried all the combinations. I also have build by my self an external cabinet and loaded with a cream alnico celestion. I=U/R and P=U*I givs all the necesary details to understand that using a larger ohm speaker into amp with lower ohm is safe...
  7. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Yes that is right. And as i have already one 8ohm speaker and not planing on building 4x12 soon i think i will go for the 8ohm. However, as a future investmen looking at a 4x12 cab a 16ohm version is the safer investment. But considering the P=IxU and I=U/R a single 16ohm speaker will reduce the...
  8. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Thanks. I already did a tryout session with two 8 ohm speakers into 4 ohm setting as the amp holds the jacks in parallel conection, also i did study electronics in high school so i know that if i reduce the reaistor by the lowest required the power consumption goes up and not a good thing will...
  9. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Well my amp has a switch in the back for 8ohm and 4ohm. Considering that it also has two inputs for speakers the 4 ohm setup switch allows me to have an 2x8 ohm speakers (black shadow is 8ohm), that will ultimately deliver a 4ohm impedance. Having this in mind, purchasing an 8ohm speaker in this...
  10. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Sure thing, once i have the speaker (have to purchase it online and wait for shipping, don't have it anywhere in the country i live in, so shipping and additional tax would be included, it is what it is). I will order the 8ohm version so i can set the amp at 8ohm when using just the one...
  11. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Thank you very much for this last post. Some great analytical data is present there. Its a good thing then i made this first cabinet modular open/close back wise
  12. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Hi again, Well thanks for participating in this post. I appropriate it very much. Btw, that demo video i have seen it when i was forming the decision of purchasing the ED. However all the videos and audios i have heard was far away from when i heard the amp live. I guess that is why we go to...
  13. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Interesting story with a "live happily ever after". It turn out the speaker was the missing ingredient to make that relationship work :) All kidding aside, yours was an experience which i find good and quality read. Yes the speaker is pricey a bit, well the most expensive in the Celestion 12"...
  14. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Hello Elvis, ****, i did check the box to notify my via email and yet no email was received. So i decided to check the forum just now as i though, oh well no answer. Thank you very much for your reply. I find your post useful and i agree with you you got to spend $ to try the best fit for...
  15. M

    Pairing Electra dyne with Celestion Cream AlNiCo 90W

    Have been searching online to find some topics about this match but no luck so far. I have already placed the items into an online cart in order to build DIY 1x12 cabinet with Celestion Cream 90w (AlNiCo). However i am still not sure because it would be a bit pricey tryout, it is the most...
Back
Top