Well, the screw is not therefore to make contact with the foil. Because there are 4 screws on the underside of the chassis to make contact to the foil and make a faraday shield to protect against RFI.
You can see that very well in the picture of a Nomad 55W I found in the internet.
( Bare screws...
Thanks a lot, I've found the ebayshop and the 47uf caps, but the problem is they have only 2000 hours
service life. Soundguruman wrote it must be, when possible, at least 20.000 hours.
I did not found the 22uf caps at that site.
Ok, thanx, was it difficult to de-solder and re-solder the caps?
I havn't found yet the right capacitors, Semicom in the UK did not have them anymore.
I only found someone that have the 22uf caps.
Hi there, I've bought these here: https://www.tube-town.net/ttstore/Knoepfe/Geriffelte-Fluted-Knoepfe/Knopf-Classic-Flutted-schwarz-50er-Packung::7811.html
they fit very well and because I use 24 pieces I bought 50 for almost the same price.
It is a pity that I don't know how to put a Foto on...
Hi ok that's fine. You can see the screw between the 3th and 4th EL 84 but than a little backwarts.
It is a very long one and there is a hole in the chassis with screw thread. (of course)
It's a pity that I cannot post a picture but it is the same like on the picture from the linked thread.
If...
Ah, I've just read this topic https://forum.grailtone.com/viewtopic.php?f=4&t=25342#p187219
LSS chassis bolt and now I'm know all about it (I think)
THX Frank
Hi guys, I'm new here and from Germany.
I've bought a used very fine Nomad 45 with an amazing tone.
As I looked in the back I saw a strange long screw in it. The screw did not connected anything but it must be original Mesa. I was thinking about it and what I think is, this could be made a...