Recent content by bettsaj

I have the export schematic, if you want a copy... I has wiring for both on it

I've swapped some tubes around with no significant change at all in the volume of channel A. I have however noticed something odd. The stacked output knob that controls both channels A & B seems to be a bit iffy. let me explain. When I turn the smaller knob for channel B the volume increases...

I have my Triaxis rigged up with a Randal power amp. i have my G-Force going through the Triaxis fx loop, and there starts the issue. With the fx loop engaged one channel is quieter than the other. It's significant enough to cause me to think there's something wrong. Could changing tube V5...

Yeah, I've seen that. Which is the wiring on the export transformer....... But I need to know what wires are what on the currently installed transformer, as they likely use a different colour coding system than the export. Basically I need to know where the wires on the new export transformer go.

Simple question.... Does anyone have the power stage schematic for the Triaxis, and also hopefully an export power stage schematic? The schematic that is freely available on the interweb doesn't have the power stage, just the audio, midi etc. I want to change the toroidal transformer from...

Right, I have triple checked all cables.... All hand soldered by me, no issues. I have also checked the G-Force running in stereo in series, placing it between the pre-amp and the power amp.... All works really well. I'll have to check your theory tonight as i'm work at the moment. Andy

I have a G-Force going through the TriAxis FX loop. Wired as follows: TriAxis FX send > G-Force Left in G-Force left output > TriAxis FX return A G-Force right output > TriAxis FX return B On the Triaxis when the FX loop is on i only hear the left channel, when the FX loop is off I only hear...

I've just bought my TriAxis and so far i'm really pleased with it. here is my current signal chain Here is the rack, and the signal chain: Wireless Rear Panel output -> korg tuner rear panel input Korg Tuner Rear panel output -> GCX rear panel Feed thru GCX rear panel loop 8 out -> Area 51...