Recent content by azernebur

I have an emerald green tolex tan wheat jutte grille HB head I'm thinking of selling. It's just not what I'm looking for. What would be worth on CL or eBay? Thinking of getting an Electra Dyne head. Thanks.

Thanks for the replies! I ended up just taking the speakers out. I wanted to check if they were blown, so I just pulled them out.

I've heard/read that this is done from the inside of the cab? I've removed the back panel and can't see where/how I can get the grill off. I see no tacks or screws, etc. Anyone have experience with this? Thanks!

Well I found a tone I never thought I could find with my HB. Per this post here (http://forum.grailtone.com/viewtopic.php?f=4&t=60433) I tried a duet of 34s on the inside and 6V6s on the outside, with the bias switch for the 34s. On full power with P-10, T-10, M-0, B-0, V-10, M-2:00 with Fat...

Here's a tone test of the settings I mentioned earlier today. Playing my '01 American Series Ash Stratocaster with two DiMarzio Area 58s and an Area 61 in the bridge. Effects (when engaged at various points) are reverb, delay, chorus, harmonizer, compressor from a Nova System, and a Crybaby Wah...

Well I found a tone I never thought I could find with my HB. Per this post here (http://www.grailtone.com/forum/viewtopic.php?f=4&t=60433) I tried a duet of 34s on the inside and 6V6s on the outside, with the bias switch for the 34s. On full power with P-10, T-10, M-0, B-0, V-10, M-2:00 with Fat...

Thanks for the responses, guys. I'm running it into a Mesa Rectifier 212 cab with the Mesa V30s. Even with the 6L6s and 34s, the bottom was very loose. Someone here on the forum tried the 6V6s set to the 34 bias and said no issues, so I tried it and it does sound better. I guess coming from a...

Thanks for the info, and I agree on the fixed biased point - should not be fixed. I don't want to go and start modding this amp as I am coming to the realization that this might not be the amp for me; so, I want to keep it stock if/when I sell it.

Need some help here on settings. I've had this Heartbreaker head for just over a year now. It came with 6L6s, I switched out to EL34s and just recently 6V6s set to the EL34 bias. I love the tones this amp produces but just cannot get it to tighten up on the low end - it's a bit too loose when...

So I built my own with parts from Mammoth electronics. Very simple DPDT switch and output jack. Only issue is I can't get the LED to switch on/off when the channels are switched. When I do wire it up correctly to get the LED working, the channels don't switch. When I do get the channels...

I'm currently running a quad of Mesa 6V6s with the EL34 bias. I read an old post by Tommy_G where he tried this out. Out of the many tube/bias combos, this seems to be the sweetest sounding to me. Not as smooth as the 6V6 bias, but a nice grind when distortion is applied - and no magic smoke...

Tommy_G, which rectifier did you run when you originally used the 6V6s with the EL34 bias - tube or SS rectifier? Thanks.

Thanks, Thunda1216 - will check it out!

Has anyone built their own channel switcher? I would love to make my own in a small 1590A enclosure, but need some guidance, maybe a schematic and instructions with info on what kind of parts? Thanks so so much!

Anyone know how to set up a loop that switches from: <Lust channel with a dirt box and a Nova System preset> to <Love channel with a different preset on my Nova System> I have a set lead tone with effects on the Lust and a set clean tone on the Love. Would like a way to make a quicker...