Recent content by #2121313

Yup that’s mine! Okay I’ll have a look as you suggest and report back. Thanks for the help:)

I have posted my entire circuit a few posts above. If you can identify what areas in my circuit have the bright reduction mod and how I can remove it that would be helpful. Thanks

If you click that link you can hit ‘start uploading’ and then it’s as per the steps I listed. This way everyone who comes through can see and provide direction and help us both.

https://imgbb.com/ Go here and upload Then hit the drop down and select BBCode Full Linked Then hit copy (or manually copy the entire link) Then paste it here. You can hit preview here first to see the pic

Hey - do you have any pics of your circuit/board? I’m after the opposite where I don’t want the bright reduction

Okay perfect thanks for that info! Do you see anything else in the circuit that could attribute to reducing brightness?

Okay so I removed the resistor and replaced it with a wire. That definitely helped. So previously it was like I was plugging into a Low Gain Jack and now it’s like plugging into a High Gain Jack. Sorta like a Marshall JCM800 has the two jacks. Which makes sense from what I understand on how...

Thanks! Just sent over an email with some pics. We’ll see what happens will wait before I make any changes myself. If anyone sees anything in my circuit that is worth mentioning as far as brightness goes please let me know. There also seems to be a slight hum I’ve noticed which is not present...

Thanks so much for the reply. I had the Reverb uninstalled by Mike B, I just never used it and wanted to keep things simple and also not have to waste an additional tube in my circuit. He wired it as per a stock non-Reverb C+ but yes kept the board (also the In/Out jacks are there too but out...

I realize that I may have posted in the wrong thread, so best to carry on in the thread in the link below as it contains the posts from Boogiebabies which I was referring to originally :) http://forum.grailtone.com/viewtopic.php?f=3&t=9653&p=528393#p528393

Second question for you, does it look like I have the Brightness Mod? This amp lacks brightness and if I understand your post above it looks like I would need to clip one of the legs of the 2 orange caps, but I am uncertain which leg to clip and also not sure if there's anything else I need to...

Hey - so if I look at my pic here it appears I do indeed have a 100K Resistor going from Vol1 to Treble, does that mean this is reducing gain (at least to some degree)? And secondly, can I simply replace this 100K Resistor with a solid wire and be good to go and expend a gain increase? I show...

Wouldn’t the 100K resistor between Vol1 and Treble reduce current flow vs boost? So if I were to replace this resistor with a solid wire wouldn’t it allow for more to flow through? I’m currently also using an OD as a clean boost in front of the amp. I’d like to stop using the OD, and I...

Hey guys, Here’s the circuit of my Mark IIC++, I find it to be lacking brightness and even gain (which I know shouldn’t be the case since it has the ++ mod). After reading this thread I think this may have 1) the brightness reduction mod and 2) resistor between Vol 1 and Treble that may be...

PM sent just not sure if it sent - still shows in my outbox