Channel switching question

[Uignal]

What type of cable is needed to use the channel switch feature on the back of my Rect-o-verb?

I know the input is 1/4," but the instrument cable I plug in does not work.

Do I need something different? My mult pedal supports this but I cannot get it to work.

Thanks.

Joe

 

[dmotisko]

Most likely it will be a 1/4 inch TRS cable.

 

[Uignal]

Newb here....what is different from a guitar instrument cable and a TRS cable?

 

[Uignal]

Well I figured out the solution.

The GT-10 has a feature where you can assign any of the footswitches whichever parameters you want.

I was trying to assign Channel A/B toggle to Ctl 2.

What I should have done was scroll almost to the end of the list and look for the parameter labeled "Amp Control." (Go figure.)

Turns out the Channel A/B parameter is for the 2 internal paths that the GT-10 can route through, not the Channels on the Amp.

FYI for anyone that cares.
Thanks for the suggestions.

Joe