Search results

Hello and welcome 👍

Yep.. popular music -scene doesn’t need guitar anymore 🤣 Just a hobby for old farts.

double post 🤣

Put the level knob in the middle as a starting point. Pedals not compatible with line level will usually do strange things while in the loop - I don’t know about your pedals how they work.. try the loop without pedals. Cable from send to return and adjust the levels so that they match (fx loop...

You can check if the loop switching works by using simple shorting cable/single ledless footswitch in the switching/loop jack. Knobs as mentioned in previous post and short/open the loop should be active or off This would rule out the original footswitches cable/connectors issues 😁

Hello and congratulations on new amp 🎉 That image is from original 3ch DR manual. If the assign and the channel knobs are set to FTSW it should work as you described. If it doesn’t there may be some other issue.

Not really related but Roadster had same “feature” with looper. Some recording in channel 3 played back in channel 4 would be completely unusable level. And vice versa. Also the tonality would be off as the NFB and ch presence would be different etc… Life sucks 🤣

Tried & failed the Reply 🤣 I am kinda kicking myself for selling the widebody closed back. Maybe at some point I’ll have to acquire one again… 4x12 ain’t the cab for every gig

Upload to youtube (and sharing with link only - if you want) and share link here. That’d work too

Here’s some bit of info 😁 Post in thread 'Colour codes on Mesa tubes' https://boogieforum.com/threads/colour-codes-on-mesa-tubes.66429/post-455840

Congrats 🙌

Could you take some audio or video clip where the amp is played in every channel? And take pictures of the the every channel settings also. That’d give a bit more information what is going on.

Not sure if the speaker impedance should be changed but the manual said something about that the OT should be able to handle one step mismatch (4 to 8 etc…) Easier with less options 😁

From manual 😁 V6 and V9 are used in 100w and 50w modes. But you cannot use 10w mode. Just google about impedances etc. what to do with speaker output. I cannot remember how it was..

If not concrete solutions at least discussion about different personal approaches 🤣 And hello also

Howdy. Can you record the midi commands to DAW and check it actually sends the PC22 🤔 does the sent value change (or triaxis program number - not always 17) if you change the program number?

Not true —> If the cable pinout is similar to other DIN stuff they’ve made the channel switching logic works on small DC voltage from middle pin to ground 0v-2v range (not REALLY sure about but…) Other pins are the latching on/off for fx-loop/solo/reverb - you name it and depends on amp 😁 I...

I had the CV-75 and it was a bit mellower than original 8ohm - still good enough for some time.. No personal opinion about the WGS but they were the bees knees at some point 🤣 Yet stopped toying around with cabs/speakers and bought the stiletto 4x12 again.. nothing else would help the itch

Well.. WGS Veteran 30 and the other WGS wannabe Vintage 30 comes to my mind.. and Eminence CV-75 sould also be V30-ish

This is why i prefer also the global master.. When I had ED and had “the talk” with FOH guy it was a pain to balance clean and drives correctly within half a minute.. And when show starts guitar is completely washed away 🤣 then same process in reverse while playing - and the volumes were really...