Search results

I use a Boss NS-2 before the TriAxis, which works very well. Plus it has a handy send/return loop which can mute any compression/wah/etc units you have before the triaxis. I also use a G-Force effects after the triaxis and I set the gate on this to cut any extra noise that might be coming from...

Removing the compression before the effects would help, but wouldn't be perfect because the distortion is compressing it a lot anyway. Plus I don't really want to alter the signal path. So I'm wondering if it's possible to measure the level of the guitar, right at the start of the chain, then...

I'm using a G-Force, but the envelope modifier (used for touch wah, etc) is not sensitive enough because of the positon of the g-force in rig. The setup is: Guitar - Noise Gate - Compression - Preamp (TriAxis) - Effects (G-Force) - Power Amp There is nothing wrong with the G-Force hardware or...

Did you manage to get this to work? There is an explanation of how two guitarists can use one G-Force here: http://g-force.info/two_players.htm ...your idea of using two amps, could follow the same idea. I've been trying to use one channel before the preamp and the other channel after the...

thanks for your reply ylo So for the two outputs I just need to wire up a jack plug with a resistor and use that instead of a cab? Is it that simple? Does it need a heat sink? Or anything else? Do you know if I can buy something like this ready made?

I also want to change my 20/20 from 110v to 240v, any chance one of you guys could send me the wiring diagram if you still have it? Many thanks!

The 20/20 power amp manual says if you "do not want to listen to the live speaker outputs, connect a load resistor with a rating of at least 40 watts and with a 4 or 8 Ohm impedance rating" when using the slave output. I understand why this is required, but what exactly should be used? I've...