Search results

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. X

    New guy here with possible mark 2 c +

    I've sent in 6 IIc's for the upgrade. Later IIc's are closer to a c+ but still need the upgrade to become a great amp.
  2. X

    New amp day - Mesa Mark III - no stripe - #25

    Mine has a leftover Gain Boost faceplate. I found some orange pilot lights so all of my Mark 3's have them instead of the blue ones.
  3. X

    New amp day - Mesa Mark III - no stripe - #25

    Nice! I've been playing through my No Stripe DRG lately. It also has the 105. I sent it to Mike B. for service and the R2/+ mod. I have Chinese Square Getters and 415's / 416's in it. They're great amps. Very close to a c+.
  4. X

    IIC+ with extra triode

    Here's some pics. Hope it helps.
  5. X

    IIC+ with extra triode

    I have a c+ with 6 12ax7's. Mike B. said the cathode follower is a buffer stage, no gain. Just tends to make it feel likes it's got more push and headroom.
  6. X

    Where would one go to to test old tubes to see if they are still good?

    I own the Maxi - Matcher 2 and the Maxi - Preamp 2 testers. I'll test your tubes for free if you live in the Chicago area.
  7. X

    Mark III + is a firebreather

    When the Lead channel and R2 are both engaged there's a little more gain. Similar to my c++'s. I use Mesa Chinese 7025 12ax7's and 415/416's in my Simul's.
  8. X

    Should Mesa Boogie reissue the Mark IIC+ ?

    I don't need any more c+'s but if I could order one the way I wanted, and it looked old school, I would definitely buy one. The same reason people buy a Gibson Reissue 59 Les Paul. As close to an original as possible
  9. X

    Mark III + is a firebreather

    I currently own 5 Mark 3+'s. SRG and DRG No Stripe's. SRG and KDRG Blue Stripe's. And a No Stripe wide DRG that Mike B. had to replace the board. So it's kind of a hybrid. It has the 105 transformer and a later stripe board. They're all awesome amps. The No Stripe's are the closest to a c+. The...
  10. X

    Should Mesa Boogie reissue the Mark IIC+ ?

    Mesa should open the Bendinelli Lab just like Gibson has the Murphy Lab for reissues. A Custom Shop where you could order any amp from Mesa the way you want, like I did in 1984.
  11. X

    MS-12 vs EVM12L

    The MS-12 is my favorite speaker to use with a c+. I also have EV's in some of the c+ combos. The EV can be a little sterile and hifi sounding. It adds very little coloration and reproduces pretty much what you put through it. The MS-12 is a little warmer and kinda smears the Mids. They pair...
  12. X

    Mark IIC Conversion to + by 3rd Party Authorized Repair place.

    If Mike B. is doing mods I would send it in before he retires. Just make sure to pack it so it survives the journey. I've sent in a over 15 amps with no problems. I've had Mike upgrade 7 IIc's. Every one came back a better amp. I use 415's/416's in all of my c+'s. The 415 has a balanced tone in...
  13. X

    So, what amps do you own?

    Factory c+'s: HR Combo x 2 HR Wide Head x 2 HRG Combo HRG ++ Combo DR Combo x 2 DRG Combo x 2 DRG ++ Combo DRG Wide Head Upgraded c+'s: HR Combo x 2 HRG Combo HRG ++ Combo DRG Combo x 2 DRG Short Head SRG ++ Combo KARG Coliseum Mark 3+'s: DRG No Stripe Combo DRG No Stripe Wide Head SRG No...
  14. X

    Made some more own stuff with the IIC+

    Sounds good!
  15. X

    What's your best combination preamp + poweramp

    Studio Preamp with a 50/50 will get you close to c+.
  16. X

    One has to wonder how many late rp11a board , original unmodified 2c amps exist.

    I have an upgraded HRG++ with the RP11 board. Serial number is 1144x. There could be a thousand IIc's with the Rp11.
  17. X

    C + pre printed on the power tube board of a late 2c that failed the loop test.

    Mike B says it's point C of the high voltage rails.
  18. X

    C + pre printed on the power tube board of a late 2c that failed the loop test.

    Just pulled the chassis on my upgraded DRG serial number 1235x with the Pull Deep faceplate. It has C+ on the power tube board. Nice catch! I never noticed that before. I'll have to ask Mike B. about that.
  19. X

    WTB IIC+ Faceplate

    I know firefight. I'd give him a faceplate if I had one.
Back
Top